The C.A.P. CO2 generators are constructed of powder coated steel enclosures that resist moisture, rust and discoloration. They will provide years of trouble-free operation. The GEN-1e and GEN-2e are manufactured in the USA using only AGA and/or UL listed components!
The GEN-1 is recommended for areas up to 15’ x 15’. The GEN-2 is recommended for larger areas up to 30’ x 30. Both feature a "two-stage" safety pilot valve, which will not allow fuel to flow to the burner unless the pilot is lit.
It has two timers that are used to add just the right amount of CO2 without the wasteful overshoot that other controllers have. One timer of the CO2-2 controller manages the length of time the CO2 is released and the other controls how often the CO2 is released. The result is a very efficient method of controlling CO2.
It has two timers that are used to add just the amount of CO2. One timer of the CO2-4 controller manages the length of time the CO2 is released and the other controls how often the CO2 is released. A Cycle Timer then lets you set how long the supplemental CO2 is kept in the growing area before being exhausted. When the cycle ends, the CO2-4 turns ON the exhaust outlets and starts the Exhaust Cycle Timer, which controls the amount of time the exhaust fans will run. Very efficient!
Even though the PPM-1c can be used as a simple way to measure your CO2 level, the true potential of the PPM-1c is not realized until it is connected to one of the controllers C.A.P. has designed to work with it.
The PPM-2a automatically "dials-in" the exact parameters for your area. It learns how your grow area uses CO2 and adapts to keep the CO2 levels constant.
This quality Carbon Dioxide emitter combines a precision regulator, flow gauge and industrial grade solenoid valve that gives you even CO2 dispersion throughout your growing area when connected with an oscillating fan (fan not included).
Simply plug the included air pump into your 15 minute timer, and run it during the "lights on" period (when plants can really use the CO2), then experience the benefits of increased growth rates by up to 6 times! No more messing with complicated CO2 emitters or generators, just plug in CO2 Boost and watch your plants grow!
With CO2 enrichment you can raise 3 to 4 crops in the time frame of one unenhanced crop. As you would expect from Harvest Master, the CO2 EASi makes the whole process simple. Just plug in your Co2 and watch it go to work. It'll even identify where improvements can be made for more growth, increased yield, reduced CO2 use and lower electricity costs.
The average level of CO2 in our atmosphere is about 300 PPM (parts per million). If that level drops below 200 PPM in an enclosed garden area, plant growth slows to a halt.
Green Air generators provide CO2 far more economically than any other means of enrichment. A thermocouple monitors the pilot flame. If the pilot flame is lost, a safety valve closes so that unburned fuel will not be released into the enclosure.
It provides a easy to use set point controller which enables the user to adjust CO2 level and span. CO2 values are adjustable in 10 ppm increments from 0 to 5000 ppm.
The Green Air Portable CO2 Monitor has a patented dual beam Absorption Infrared gas sensor that ensures long term stability and durability. It has the ability to display CO2 readings in less than 30 seconds. Also equipped with an output for recording data via accessory cable and data logger. Recorded data can be graphed and printed using Windows based VG graphing software. Analog output for Recordaire® or other data logger. Digital output for optional UIP interface software.
It's easy to install and operate. Following your set point values (desired PPM CO2 and elevation), the SPC-1 will activate/de-activate the CO2 enrichment equipment plugged into the 6' piggy back cord. Just set it and forget it!
The CHHC-1 gives you one-touch calibration of the CO2 sensor with simple pushbuttons to enter desired PPM settings and display the current CO2 PPM readings. Can be operated in "Fuzzy Logic" mode for compressed CO2 or On/Off for CO2 generators. There's a CO2 receptacle to connect CO2 generator or 120 volt compressed CO2 solenoid / regulator assembly. The CHHC-1 also has a 12 volt power supply to connect to any temperature controller so that the CO2 devise will be disabled when the fan is operating to prevent CO2 depletion.
By coupling CO2 tanks together, you extend the time of use between tank changes. Use with either 20 lb. or 50 lb. tank. Maximum inlet pressure 3000 PSI.
Available in both Propane and Natural Gas, the VCG-27 Variable CO2 Generators are the safest and most advanced CO2 generators available in today's marketplace.
Available in both Propane and Natural Gas, the VCG-6 Variable CO2 Generators are the safest and most advanced CO2 generators available in today's marketplace.
