Watts HID Light Controllers 

Watts Light Controllers safely switch multiple high-amperage electrical equipment in your growroom, even atmosphere controllers. Ranging from 4 light to 20 HID light capacities, each Watts Light Controller comes with a 5-year warranty. 

Built with a high power relay, hard-wired with 12-gage wire custom metal box, 240v switched-power is supplied on the side panel via 240v outlets.

Included are two 120V trigger cables that can be routed with a dual-outlet timer (not included) to power HID lights on / off simutaneously. Trigger cables can be connected to two separate timers (not included), each controlling one-half of the HID light outlets. The trigger cables control the HID outlets on the side of the unit.

Each Watts Light Controller also has 4 continuously-powered 120V outlets located on the front panel that can handle up to 10 amps for use with fans, pumps and other hydroponics equipment. Plug-in timers can be utilized.

Drilled metal tabs on the top and bottom of the unit provide easy wall mounting. Manufacturer suggests using oscillating fan on the controller while in operation.

Watts Light Controller units need to be hard-wired to the electrical source. Consult an electrician for installation.

4 Light requires a double 30 amp breaker
6 Light requires a double 40 amp breaker
8 Light requires a double 60 amp breaker
10 Light requires a double 60 amp breaker
12 Light requires 2 double 40 amp breakers
16 Light requires 2 double 60 amp breakers
20 Light requires 2 double 60 amp breakers